BELL M8 CARBON SA2020 HELMET
-
1-4 DAYS DELIVERY
-
100% ORIGINAL AND QUALITY
Designed for closed cockpit forms of racing, the M8 Carbon is the next evolution in Bell’s legendary M series design platform incorporating traditional styling, enhanced visibility with maximum versatility allowing the helmet to be used in all forms of racing. With an ultra-lightweight carbon shell, pro-style interior, superior ventilation and large eyeport for racers who require eyewear or prefer a larger opening, the M8 Carbon provides next-level comfort for drivers who want Bell’s iconic brand styling and industry-leading performance.
- Ultra-lightweight carbon shell
- Advanced multi-density, multi piece liner to maximize energy absorption and impact performance
- Large eyeport for enhanced visibility
- Versatile ventilation system featuring lower front chin bar ventilation and upper air-intake vents that can be opened and closed
- Integrated channels in face piece offer multiple options to install drink tube and radio systems
- M6 terminals for FHR anchor attachment and homologated for use with approved head and neck devices
- Synthetic rubber gasket seal to prevent dirt and water from entering the helmet
- Shield and pivot kit: SRV-8, SRV1
- Homologation: Snell SA2020 and FIA8859-2020 approved
- Alternative interior fabric colors: Black, Blue, Green, Red, Tan, Violet, White and Yellow (by special order)
- Color: Carbon
- Sizes: 7 1/8 (57-) to 7 5/8+ (61+)
Proper helmet fit is vital to the performance of a helmet during an impact. For maximum protection the helmet must fit properly with the chin strap securely fastened and provide adequate peripheral vision.
Measuring the head is only a starting point for the entire sizing procedure. Due to varying shapes, heads that are apparently the same size when measured by a tape may not necessarily fit the same size helmet.
A small metal tape measure or a cloth tape may be used to make your initial measurement. You can also use a string, which can then be laid against a measuring tape.
The circumference of the head should be measured at a point approximately one inch above the eyebrows in front, and at a point in the back of the head that results in the largest possible measurement. Take several measurements. The largest measurement is the one you want to try on first. If you use a balaclava or head sock, always measure and fit the helmet with it on. Use the Bell sizing chart to determine the size that best matches the head measurement. Refer to chart below to determine your size. If you fall in between sizes, you can call a helmet expert at Auto Craze at (305) 358-9021 for assistance.
Designed for closed cockpit forms of racing, the M8 Carbon is the next evolution in Bell’s legendary M series design platform incorporating traditional styling, enhanced visibility with maximum versatility allowing the helmet to be used in all forms of racing. With an ultra-lightweight carbon shell, pro-style interior, superior ventilation and large eyeport for racers who require eyewear or prefer a larger opening, the M8 Carbon provides next-level comfort for drivers who want Bell’s iconic brand styling and industry-leading performance.
- Ultra-lightweight carbon shell
- Advanced multi-density, multi piece liner to maximize energy absorption and impact performance
- Large eyeport for enhanced visibility
- Versatile ventilation system featuring lower front chin bar ventilation and upper air-intake vents that can be opened and closed
- Integrated channels in face piece offer multiple options to install drink tube and radio systems
- M6 terminals for FHR anchor attachment and homologated for use with approved head and neck devices
- Synthetic rubber gasket seal to prevent dirt and water from entering the helmet
- Shield and pivot kit: SRV-8, SRV1
- Homologation: Snell SA2020 and FIA8859-2020 approved
- Alternative interior fabric colors: Black, Blue, Green, Red, Tan, Violet, White and Yellow (by special order)
- Color: Carbon
- Sizes: 7 1/8 (57-) to 7 5/8+ (61+)
Proper helmet fit is vital to the performance of a helmet during an impact. For maximum protection the helmet must fit properly with the chin strap securely fastened and provide adequate peripheral vision.
Measuring the head is only a starting point for the entire sizing procedure. Due to varying shapes, heads that are apparently the same size when measured by a tape may not necessarily fit the same size helmet.
A small metal tape measure or a cloth tape may be used to make your initial measurement. You can also use a string, which can then be laid against a measuring tape.
The circumference of the head should be measured at a point approximately one inch above the eyebrows in front, and at a point in the back of the head that results in the largest possible measurement. Take several measurements. The largest measurement is the one you want to try on first. If you use a balaclava or head sock, always measure and fit the helmet with it on. Use the Bell sizing chart to determine the size that best matches the head measurement. Refer to chart below to determine your size. If you fall in between sizes, you can call a helmet expert at Auto Craze at (305) 358-9021 for assistance.
