AIM MYCHRON EGT THERMOCOULPLE SENSOR AIM MYCHRON EGT THERMOCOULPLE SENSOR AIM AIM Mychron 5 & 4 EGT Thermocouple Sensor The K-type (two blade flat) connector on any MyChron thermocouple requires either a MyChron K-Type to 3 Pin 712 Patch Cable (Part No. AIM-MC-008) for Kart dashes or a MyChron K-Type to 4 pin 712 Patch Cable (Part No. AIM-MC-208) for MyChron3 XG-Log Auto dash. MyChron3 Gold Auto and MyChron3 Plus Auto already use the K-Type connector. For these dashes, or to extend the cable further for other dashes, use the MyChron K-Type Thermocouple Patch Cable (Part No. AIM-MC-203).  We also stock Replacement M5 Thermocouple Mounting Bung (Part No. AIM-MC-018) to move the thermocouple to a new exhaust pipe. This is a simple add-on to any pipe as you just drill a hole, grind away any paint and weld it in. The preferred location for a thermocouple is 150m, (5.90") from the cylinder head exhaust port of the engine. Patch cable sold separately. AiM Mychron EGT Sensor Details: Manufacturer: Aim Manufacturer part number: X05TCM12A1175M Pipe end thread: M5 Harness end: K-Type (2 blade flat yellow) This has M5 male threads on thermocouple sensor
AIM

AIM MYCHRON EGT THERMOCOULPLE SENSOR

Code: X05TCM12A1175M
Add Your Review
AIM MYCHRON EGT THERMOCOULPLE SENSOR AIM MYCHRON EGT THERMOCOULPLE SENSOR AIM MYCHRON EGT THERMOCOULPLE SENSOR
AIM MYCHRON EGT THERMOCOULPLE SENSOR
AIM MYCHRON EGT THERMOCOULPLE SENSOR AIM MYCHRON EGT THERMOCOULPLE SENSOR AIM MYCHRON EGT THERMOCOULPLE SENSOR
Category: AIM, KART, KART - DATA ACQUISITION, Products

  • 1-4 DAYS DELIVERY

  • 100% ORIGINAL AND QUALITY

AIM Mychron 5 & 4 EGT Thermocouple Sensor

The K-type (two blade flat) connector on any MyChron thermocouple requires either a MyChron K-Type to 3 Pin 712 Patch Cable (Part No. AIM-MC-008) for Kart dashes or a MyChron K-Type to 4 pin 712 Patch Cable (Part No. AIM-MC-208) for MyChron3 XG-Log Auto dash. MyChron3 Gold Auto and MyChron3 Plus Auto already use the K-Type connector. For these dashes, or to extend the cable further for other dashes, use the MyChron K-Type Thermocouple Patch Cable (Part No. AIM-MC-203). 


We also stock Replacement M5 Thermocouple Mounting Bung (Part No. AIM-MC-018) to move the thermocouple to a new exhaust pipe. This is a simple add-on to any pipe as you just drill a hole, grind away any paint and weld it in. The preferred location for a thermocouple is 150m, (5.90") from the cylinder head exhaust port of the engine.

Patch cable sold separately.

AiM Mychron EGT Sensor Details:

  • Manufacturer: Aim
  • Manufacturer part number: X05TCM12A1175M
  • Pipe end thread: M5
  • Harness end: K-Type (2 blade flat yellow)
  • This has M5 male threads on thermocouple sensor

AIM Mychron 5 & 4 EGT Thermocouple Sensor

The K-type (two blade flat) connector on any MyChron thermocouple requires either a MyChron K-Type to 3 Pin 712 Patch Cable (Part No. AIM-MC-008) for Kart dashes or a MyChron K-Type to 4 pin 712 Patch Cable (Part No. AIM-MC-208) for MyChron3 XG-Log Auto dash. MyChron3 Gold Auto and MyChron3 Plus Auto already use the K-Type connector. For these dashes, or to extend the cable further for other dashes, use the MyChron K-Type Thermocouple Patch Cable (Part No. AIM-MC-203). 


We also stock Replacement M5 Thermocouple Mounting Bung (Part No. AIM-MC-018) to move the thermocouple to a new exhaust pipe. This is a simple add-on to any pipe as you just drill a hole, grind away any paint and weld it in. The preferred location for a thermocouple is 150m, (5.90") from the cylinder head exhaust port of the engine.

Patch cable sold separately.

AiM Mychron EGT Sensor Details:

  • Manufacturer: Aim
  • Manufacturer part number: X05TCM12A1175M
  • Pipe end thread: M5
  • Harness end: K-Type (2 blade flat yellow)
  • This has M5 male threads on thermocouple sensor