ARAI GP-J3 M6 RACING HELMET
-
1-4 DAYS DELIVERY
-
100% ORIGINAL AND QUALITY
ARAI GP-J3 M6 Racing Helmet
The Arai GP-J3 is another representation of Arai's pursuit of comfort and function in one attractive package whose simplicity and smooth lines belie the complex energy-management system within. The updated and improved shell shape and construction incorporate extended facial coverage with sculpted "FCS" cheek pads for improved support and comfort. The same care and attention that Arai puts into every helmet can be found in the details of the GP-J3 open-face series. The interior fit is typical Arai, benefiting from over 50 years of research and refinement, and resulting in a helmet that more closely matches the shape of the human head. The fit is close but remarkably comfortable, allowing for the smallest possible helmet to be worn for maximum protection. Meets Snell SA2020 & FIA 8859-2015 standards.
ARAI GP-J3 M6 Racing Helmet Specs and Features:
POSITIVE SHIELD LATCH
Positive latch mechanism provides Solid shield latching, while allowing normal operation of the shield. Designed to be an integral component of the shield system and function, not just an add-on afterthought. The simplicity of the function masks the complexity of the design.
NEW SHIELD PIVOT HARDWARE
New shield pivot hardware, with redesigned track slider that improves aerodynamics. New wider 6 series shield & eye port, for increased peripheral field of view when compared to the previous 5 series. Shield, pivot hardware and wider eye port were developed on the RC and adapted to the GP-6PED.
WIDER EYEPORT
Wider eye port for increased peripheral field of view, when compared to the previous GP-5 series.
VENTILATION
Large, closeable, intake vents combined with larger 10mm holes greatly increase air intake. Larger 10mm rear vent holes, with larger cowls, increases airflow even further.
M6 ANCHOR TYPE
Integrated seats to accommodate a variety of Head and Neck Restraint devices. Pre-Installed M6 threaded washer/nut, with 6mm threads, to accept a variety of anchors systems for variety of Head and Neck Restraint devices and make installation much easier for people not familiar with such installations. Flat surface area around the mounting nut to allow the anchor post base to rest flush with the helmet surface around the entire perimeter of the anchor base. FIA-8859-2015 certification sticker applied to the interior liner material.
NEW CHINBAR
Newly sculpted chin bar and ridge along lower edge of shell to improve structural integrity. Provides a stronger shell near the opening where it is needed, as well as lowers the center of gravity. Rise in shell above the shoulders for added clearance.
E-JECT READY CROWN PAD
Pre-cut pocket, under crown pad, can be easily removed to accommodate optional E-Ject(R) system.
GP-J3 M6 Racing Helmet Sizing
ARAI GP-J3 M6 Racing Helmet
The Arai GP-J3 is another representation of Arai's pursuit of comfort and function in one attractive package whose simplicity and smooth lines belie the complex energy-management system within. The updated and improved shell shape and construction incorporate extended facial coverage with sculpted "FCS" cheek pads for improved support and comfort. The same care and attention that Arai puts into every helmet can be found in the details of the GP-J3 open-face series. The interior fit is typical Arai, benefiting from over 50 years of research and refinement, and resulting in a helmet that more closely matches the shape of the human head. The fit is close but remarkably comfortable, allowing for the smallest possible helmet to be worn for maximum protection. Meets Snell SA2020 & FIA 8859-2015 standards.
ARAI GP-J3 M6 Racing Helmet Specs and Features:
POSITIVE SHIELD LATCH
Positive latch mechanism provides Solid shield latching, while allowing normal operation of the shield. Designed to be an integral component of the shield system and function, not just an add-on afterthought. The simplicity of the function masks the complexity of the design.
NEW SHIELD PIVOT HARDWARE
New shield pivot hardware, with redesigned track slider that improves aerodynamics. New wider 6 series shield & eye port, for increased peripheral field of view when compared to the previous 5 series. Shield, pivot hardware and wider eye port were developed on the RC and adapted to the GP-6PED.
WIDER EYEPORT
Wider eye port for increased peripheral field of view, when compared to the previous GP-5 series.
VENTILATION
Large, closeable, intake vents combined with larger 10mm holes greatly increase air intake. Larger 10mm rear vent holes, with larger cowls, increases airflow even further.
M6 ANCHOR TYPE
Integrated seats to accommodate a variety of Head and Neck Restraint devices. Pre-Installed M6 threaded washer/nut, with 6mm threads, to accept a variety of anchors systems for variety of Head and Neck Restraint devices and make installation much easier for people not familiar with such installations. Flat surface area around the mounting nut to allow the anchor post base to rest flush with the helmet surface around the entire perimeter of the anchor base. FIA-8859-2015 certification sticker applied to the interior liner material.
NEW CHINBAR
Newly sculpted chin bar and ridge along lower edge of shell to improve structural integrity. Provides a stronger shell near the opening where it is needed, as well as lowers the center of gravity. Rise in shell above the shoulders for added clearance.
E-JECT READY CROWN PAD
Pre-cut pocket, under crown pad, can be easily removed to accommodate optional E-Ject(R) system.
